-Рубрик?/strong>

 -Поис?по дневнику

Поис?сообщени??MerlettKA

 -Статистика

Статистика LiveInternet.ru: показано количество хито??посетителе? title=
Создан: 02.07.2012
Записе? 22826
Комментариев: 3429
Написано: 27608


Брасле?из кристаллов /Схем? - Checkerboard Bracelet /бе?перевода/

Сред? 02 Декабря 2020 ? 08:26 + ?цитатник
28_рас (395x384, 127Kb)  
This geometrical design uses 
a simple right angle weave. 
 
By Angel Dreams; designed for 
Crystal Park.
 
MATERIALS
1 x Tibetan Silver Pretty Twist toggle
3m beading thread
 
BEADS
15 x 6mm Orchard Rd bi-cones – Gunmetal
62 x 4mm Orchard Rd bi-cones – Crystal
40 x 3mm Orchard Rd bi-cones – Jet

TOOLS Beading needle
Scissors 
PVA glue
 
LENGTH: 19cm


28_рас1 (242x237, 19Kb)

28_рас1а (381x165, 28Kb)

28_рас1а2 (456x194, 48Kb)
STEP ONE
Using 2m single
strand of beading
thread and needle,
thread 1 x 6mm
bi-cone, 1 x 4mm
bi-cone, 1 x 3mm
bi-cone, 1 x 4mm
bi-cone onto thread.
Leaving a 15cm tail, tie a double knot in the threads to form a circle. Needle through until exiting 3mm bi-cone. Diagram 1.
 
STEP TWO
Thread 1 x 4mm bi-cone, 1 x 6mm bi-cone, 1 x 4mm bi-cone; taking thread through 3mm bi-cone from Step 1. Continue through bi-cones until exiting 6mm bi-cone. Diagram 2.
 
STEP THREE
Thread on 1 x 4mm bi-cone, 1 x 3mm bi-cone, 1 x 4mm bi-cone. Take thread through the 6mm bi-cone from Step 2. Needle through bi-cones until exiting 3mm bi-cone.
 
STEP FOUR
Repeat Steps 2 and 3 until you have a total of 15 x 6mm bi-cones. Design note: To adjust the length, make sure you start and finish with a 6mm bi-cone.
 
STEP FIVE
After Step 4, thread through the final 6mm bi-cone, the next 2 x 4mm bi-cones on the outside of the bracelet. Add 1 x 3mm bicone, going through next 2 x 4mm bi-cones on the outside of the bracelet. Continue adding 1 x 3mm bi-cone to the space at top of the 6mm bi-cone until the second-last  6mm bi-cone at the other end. Diagram 3.
 
STEP SIX
Repeat Step 5 on the opposite side.
 
STEP SEVEN
Thread through 6mm bi-cone at the end of the bracelet. Thread 2 x 4mm bi-cones and one section of toggle. Go back through 4mm bi-cone closest to the toggle. Add 1 x 4mm bi-cone, threading needle through the hole on the opposite side of the 6mm bi-cone. Repeat to secure and finish thread.
 
STEP EIGHT
Repeat Step 7, using the 15cm tail left at the start of the work to finish the second end.
 
KITS available.
Crystal Park
9 Cassia Street
Brown Plains, Qld Telephone 07 3800 3825 www.crystalpark.com.au

28рас (581x700, 263Kb)

28рас1 (700x575, 61Kb)
Рубрик?  112 Бисе??бижу /Браслеты
Метк?  

Процитирован?3 ра?/a>
Понравилос? 2 пользовате??/i>